Some Firefox users may need to log in more than once to log in. It's a known Firefox bug. Check "keep me logged in," it might help.

Es posible que algunxs usuarixs de Firefox tengan que conectarse más de una vez para iniciar sesión. Es un error conocido de Firefox. Marca "keep me logged in" (mantenerme conectado), puede ayudar.


Truing Stand: Difference between revisions

From Bike Collectives Wiki
mNo edit summary
mNo edit summary
Line 8: Line 8:
* [[Despoking wheels]].
* [[Despoking wheels]].


'''Two important things to remember:'''
== Important things to remember ==


# Make sure the axle gets into the slots properly and that the wheel gets into the right place. Check once you get it in that the stand is pressing up against the locknuts and that the axle is down in the slots.
# Make sure the axle gets into the slots properly and that the wheel gets into the right place. Check once you get it in that the stand is pressing up against the locknuts and that the axle is down in the slots.
# The second is '''do not''' overtighten. Just turn the knob until it holds the wheel in place, not until you can't turn it anymore.
# '''Do not''' overtighten. Just turn the knob until it holds the wheel in place, not until you can't turn it anymore.


== Go Back ==
== Go Back ==


* [[Shop Manual]]
* [[Shop Manual]]

Revision as of 17:46, 27 December 2006

Park Tool TS-2: Professional Wheel Truing Stand

Reasons to use a truing stand:

Important things to remember

  1. Make sure the axle gets into the slots properly and that the wheel gets into the right place. Check once you get it in that the stand is pressing up against the locknuts and that the axle is down in the slots.
  2. Do not overtighten. Just turn the knob until it holds the wheel in place, not until you can't turn it anymore.

Go Back